Product Description: Alumina-graphite Ladle Shroud， Ladle sheel stream from splashing and oxidation as it flows into the tundish. The products could serve over 10 hours of casting.The significant characteristics of the products are re-useable and no preheating requirement. *Graphic illustration:1.Argon injection...
Product Description: The MgO-C Bricks used in HF series EAF can be designed and manufactured according to different parts and conditions. The product uses high-purity, high-density fused magnesia; high purity graphite and high-quality raw materials, supplemented by special binders and additives, produced...
Product Description: The HF series of Purging Plugs is a state-level high-tech product. The product uses high-purity alumina and a variety of admixtures refined, unique slot design, with a high rate of blowing through, easy to adjust air flow, good thermal shock...
Product Description:Slide gate plates are produced via high speed mixing, high pressure pressing, vacuum and pressurized pitch impregnation, precise surface grinding and hot stainless steel looping processes. The products have low impurity and are stable on quality. Good performance on...
Product Description: Ladle steel stream from splashing and oxidation as it flows into the tundish. The products could serve over 10 hours of casting.The significant characteristics of the products are reusable and no Preheating requirement. *Graphlc illustration:1.Built in steel nut for...
Product Description: The HF series of Tapping hole Bricks uses a high-purity, high-density fused magnesia; high purity graphite and high-quality raw materials, supplemented by special binders and additives, produced by high-pressure molding process. With Oxidation resistance, high strength, anti-erosion ability,...
Product Description: The HF series of Tundish Safety Lining Castables is developed for meet users’ different conditions for use and construction requirements applicable to the tundish permanent layer with good fluidity, high strength, easy construction, including low cement, ultra low cement, anhydrous...
Product Description:Â The HF series refractory Mortar is the ideal material for furnace masonry caulk in metallurgy, building materials, petrochemical, machinery with a high bond strength, high temperature performance....
Product Description:Â The HFÂ series Stuffing Sand for Ladle is refined by the mechanical treatment of spherical particles and a variety of admixtures with good fluidity, compaction resistance and heat insulation, do not go up the during the process of using ,chemical...
Product Description: The HFÂ series of ladle castable is with high strength, anti-erosion, good thermal shock resistance. Compared with the traditional MgO-C Bricks, it has simple construction, high integrity, no cracks between the blocks, low refractory consumption of steel...